 Potable water systems (hot & cold), water treatments, compressed air, fire-extinguishing and all those applications were a quick and safe joint is required.
Compressed air
Heating facilities
Sanitation facilities
Fire-extinguishing system (sprinkler)
Solar energy
Plumbing
Industrial facilities
Shipping facilities |
Grade of the fitting :
Joint :
Working pressure :
Working temperature :
Fitting wall thicknes :
Profile :
O-ring : |
Stainless steel AISI 316
Cold joint, inseparable
16PN
90ºc maximum (for different temperatures, ask first)
1,5 (from 15 mm. To 54 mm.) – 2 mm. (76,1 & 88,9 & 108)
M
Black epdm- green fkm (ask for different materials according to other temperature or fluid type) |
1.- Cut the tube at right angle. Avoid using oil cooled saws, abrasive wheels or cutting torches.
 |
2.- Deburre the outside and the inside of the tube in order to avoid damaging the O-ring.
 |
3.- Verify that the O-ring is properly located.
 |
4.- Slightly rotate the tube making it insert into the fitting until it reaches its stop. Mark the tube as a reference. Never use oil or grease as a lubricant. Use water and soap instead.
 |
5.- Fit the jaw into the pressing machine and close the bolt.
 |
6.- Open the jaw, make it fit into the profile of the fitting and press. The rotatory head of the pressing machine alloys an easy work.
 |
How a joint looks after the pressing
 |
We are presenting in this catalogue our range of NUMEPRESS products, the stainless steel tube and pressfitting system which allows making facilities in a very easy way, without using welding or threads, saving a considerable amount of time and money.
